The TeckWrap Zenith Series Window Film Sample Set lets you test multiple nano-ceramic tint shades on your own vehicle before committing to a full install. Available in two configurations: TW-S-NC01 (3-in-1 kit with Zenith70, Zenith30, and Zenith15) and TW-S-NC02 (2-in-1 kit with Zenith70 and Zenith30). All Zenith films use nano-ceramic technology with no metal particles, so you get full GPS, cell, radio, and Wi-Fi signal performance with zero interference. Every shade blocks ≥99% UV and offers strong solar heat rejection. Backed by an 8-year warranty when applied as a full install. TW-S-NC01 (3-in-1 set): Zenith70 Windshield Film: 1.52 m × 1 m, 75% VLT light grey (×1) Zenith30 Side Window Film: 1.52 m × 0.8 m, 30% VLT light tint diamond black (×2) Zenith15 Side Window Film: 1.52 m × 0.8 m, 15% VLT dark tint black (×3) TW-S-NC02 (2-in-1 set): Zenith70 Windshield Film: 1.52 m × 1 m, 75% VLT light grey (×1) Zenith30 Side Window Film: 1.52 m × 0.8 m, 30% VLT light tint diamond black (×2)

Key Attributes

Pre-cut sample sheets for real-vehicle testing All films: 2 mil nano-ceramic, signal-friendly (no GPS/cell/radio interference) ≥99% UV rejection across all shades 8-year warranty on full installation Test multiple shades before committing to a full roll purchase Ideal for car owners comparing tint shades before professional install, installers showing clients real options on their own windows, and DIYers narrowing down before committing. Verify local VLT laws before deciding on a shade. Order now. Backed by TeckWrap's decade of automotive film manufacturing experience and worldwide installer network. Sample set contents Zenith70 Zenith30 Zenith15 Size 1.52 × 1 m 1.52 × 0.8 m 1.52 × 0.8 m Quantity (TW-S-NC01) 1 2 3 Quantity (TW-S-NC02) 1 2 — Thickness 2 mil 2 mil 2 mil Material Nano-ceramic Nano-ceramic Nano-ceramic Use Windshield (light grey) Side window (light tint) Side window (dark tint) VLT 75 ± 2% 30 ± 2% 15 ± 2% Internal VLR 9% 6% 6% External VLR 9% 6% 6% IR Transmittance 12 ± 2% 12 ± 2% 11 ± 2% UV Rejection ≥99% ≥99% ≥99% TSER 45 ± 2% 65 ± 2% 57 ± 2%

Film Construction

• Film Type: Window film
• Film Thickness: product-specific
• Release Liner: product-specific
• Adhesive: product-specific
• Roll Width: product-specific
• Full Roll Length: product-specific

Performance

• Service temperature: product-specific
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty and use conditions depend on the specific item.

• Application temperature: product-specific
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: consult product use before application
• Post-heat: product-specific
• Cure: product-specific
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.