TeckWrap
Smoked Spectra Headlight and Taillight Tint Film (THL55) 1

Description

TeckWrap Spectra: is a smoked headlight and taillight tint film built for drivers who want the dark lens look without losing usable night vision. 54% VLT keeps your low beams sharp and fully usable at night. The 330μm build handles rocks and road debris without cracking and flexes over compound curves without lifting. Henkel acrylic adhesive at approximately 2,200g/inch bonds flat against the lens, resists edge lifting, and removes residue-free when you are ready to change it 99% UV block stops yellowing and optical hazing before they start, so the film holds its clarity for years, not months. Cheap tint films make you choose between the look and your visibility. Most yellow out or start lifting before the first winter is over. Spectra THL55 does not work that way.

Key Attribu es: t:

  • Thickness that protects: 330μm total build with a 210μm application layer (8.27mil). The film stands up to rocks and road debris without cracking, yet flexes easily over complex curves.
  • Grip that stays put: Henkel acrylic adhesive delivers ≈2200g/inch peel strength. It bonds tight to the lens, resists lifting at the edges, and peels off residue-free when you switch styles.
  • Clarity you can see through: 54% light transmission keeps your night vision intact. The ≈1.5% haze and ≈90% gloss keep the beam crisp and the surface mirror-bright.
  • UV defense that lasts: 99% UV block stops yellowing and hazing dead in its tracks. The film stays optically clear for years, not months.
  • Strength that absorbs impacts: 18MPa tensile strength and 350% elongation. The film stretches around tight headlight housings and absorbs minor impacts without tearing.

Visual Performance: 90% gloss gives the lens a deep, reflective finish in daylight. At night, 54% VLT keeps your low beams sharp and focused. Ultra-low 1.5% haze means no diffusion, no fog just a usable beam on dark roads.

Application & Fitment: 350% elongation handles tight curves on European and Asian headlight housings without resistance. The PET release liner holds the film flat under tension during install for a clean, bubble-free finish. The 0.4m x 15M roll covers multiple sets.

Ready to Transform Your Ride?: Stop settling for boring lights or brittle films. Order Spectra today and see why real drivers choose a headlight tint that actually works.

Recommended Products

Valuable Advices

View all
DIY vs. Professional Window Tint Installation

DIY vs. Professional Window Tint Installation

Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting can save money upfront, but profe...

E. Adnan | June 13, 2026

How To Wrap Taillights

How To Wrap Taillights

Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from gathering your tools and preparing the lens to ap...

E. Adnan | April 29, 2026

Common Mistakes When Applying Color PPF

Common Mistakes When Applying Color PPF

Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color PPF installation mistakes and pr...

E. Adnan | December 13, 2025

When to Use Adhesive Promoters and Tack Reducers?

When to Use Adhesive Promoters and Tack Reducers?

Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack reducers allow s...

Nicki Ammelung | September 8, 2025

Common Causes of Vinyl Adhesion Failure

Common Causes of Vinyl Adhesion Failure

Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor surface prep to incorrect heat application, s...

Shukhrat Ismatov | August 12, 2025

Ten Must-Have Techniques for a Top-Tier Car Wrap Technician

Ten Must-Have Techniques for a Top-Tier Car Wrap Technician

Here are the 10 non-negotiable skills for flawless vinyl film & PPF wraps. From bubble-free seams to contour mastery… How many have you truly checked? Level up in minutes! The automotive wrap industry has experienced...

Phyllis Li | July 24, 2025

Wrapping a Rusty Car: Is It Possible?

Wrapping a Rusty Car: Is It Possible?

Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or peeled coating? The answer is nuanced...

Phyllis Li | December 11, 2024

How to Wrap a Car in Winter Time

How to Wrap a Car in Winter Time

Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in a warm, dry space, thoroughly clean the ca...

Vasile Sayfutdin | December 6, 2024