The TeckWrap Fortis Series Window Film Sample Set lets you test multiple magnetron sputtering tint shades on your own vehicle before committing to a full install. Available in two configurations: TW-S-MS01 (3-in-1 kit with Fortis70, Fortis30, and Fortis20) and TW-S-MS02 (2-in-1 kit with Fortis70 and Fortis30). All Fortis films use magnetron sputtering technology for strong heat and IR rejection with refined optical clarity. Every shade blocks ≥99% UV and rejects 55% of infrared. Pre-cut sheets make real-vehicle testing fast and easy. TW-S-MS01 (3-in-1 set): Fortis70 Windshield Film: 1.52 m × 1 m, 70% VLT (×1) Fortis30 Side Window Film: 1.52 m × 0.8 m, 25% VLT light tint (×2) Fortis20 Side Window Film: 1.52 m × 0.8 m, 15% VLT dark tint (×3) TW-S-MS02 (2-in-1 set): Fortis70 Windshield Film: 1.52 m × 1 m, 70% VLT (×1) Fortis30 Side Window Film: 1.52 m × 0.8 m, 25% VLT light tint (×2)

Key Attributes

Pre-cut sample sheets for real-vehicle testing All films: 2 mil magnetron sputtering construction ≥99% UV rejection across all shades 55% IR rejection across all shades Scratch-resistant durable film Test multiple shades before committing to a full roll purchase Ideal for car owners comparing tint shades before professional install, installers showing clients real options on their own windows, and DIYers narrowing down before committing. Verify local VLT laws before deciding on a shade. Order now. Backed by TeckWrap's decade of automotive film manufacturing experience and worldwide installer network. Sample set contents Fortis70 Fortis30 Fortis20 Size 1.52 × 1 m 1.52 × 0.8 m 1.52 × 0.8 m Quantity (TW-S-MS01) 1 2 3 Quantity (TW-S-MS02) 1 2 — Thickness 2 mil 2 mil 2 mil Technology Magnetron Sputtering Magnetron Sputtering Magnetron Sputtering Use Front windshield Side window (light tint) Side window (dark tint) VLT 70 ± 2% 25 ± 2% 15 ± 2% VLR 10% 6% 6% IR Rejection 55 ± 2% 55 ± 2% 55 ± 2% UV Rejection ≥99% ≥99% ≥99% TSER 37 ± 2% 50 ± 2% 52 ± 2%

Film Construction

• Film Type: Window film
• Film Thickness: product-specific
• Release Liner: product-specific
• Adhesive: product-specific
• Roll Width: product-specific
• Full Roll Length: product-specific

Performance

• Service temperature: product-specific
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty and use conditions depend on the specific item.

• Application temperature: product-specific
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: consult product use before application
• Post-heat: product-specific
• Cure: product-specific
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.