The TeckWrap Felt Buffer Sets are 10-piece squeegee buffer kits available in two sizes: Compact (TW-BUF-S) and Premium Large (TW-BUF-L). Each set combines thin candy-shaped felts for PPF edge sealing and detail work with thicker rectangular felts for color change film smoothing on flat and curved panels. Made from ultra-fine, high-density non-marking fiber with zero shedding, both versions protect premium vinyl and PPF surfaces from scratches while keeping squeegees film-safe across every install.

Key Attributes

10-piece kits available in two sizes (TW-BUF-S compact / TW-BUF-L large) Each kit: 5 candy-shaped felts + 5 rectangular felts Lint-free, zero-shedding, non-marking high-density fiber Candy-shaped felts: PPF edge sealing, tight curves, detail work Rectangular felts: color change film smoothing on flat and medium-curved panels TeckWrap brand color scheme Compact organizer case: 19.5 × 8 × 2 cm Size variants: TW-BUF-S (Compact): thin candy felts 125 × 30 mm / thick rectangular felts 110 × 33 mm TW-BUF-L (Large): large candy felts 150 × 30 mm / large rectangular felts 126 × 30 mm Ideal for professional PPF specialists, vinyl wrap installers, and detail-focused shops working with premium films. Order now. Backed by TeckWrap's decade of vinyl wrap and PPF manufacturing experience and worldwide installer network.

Film Construction

• Film Type: Tools
• Film Thickness: product-specific
• Release Liner: product-specific
• Adhesive: product-specific
• Roll Width: product-specific
• Full Roll Length: product-specific

Performance

• Service temperature: product-specific
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty and use conditions depend on the specific item.

• Application temperature: product-specific
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: consult product use before application
• Post-heat: product-specific
• Cure: product-specific
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.