Standard glossy carbon reflects light the way any dark gloss surface does, a flat white highlight with no character to it. Premium Black (RCF03-R) picks up a warm, reflective undertone instead, light glints off the weave with a gold-bronze cast rather than a plain white glare, giving the gloss more depth than a standard black carbon finish.

Key Attributes

• Warm reflective highlight: the weave catches light with a gold-bronze glint instead of a flat white gloss reflection.
• Genuine weave beneath the topcoat: authentic carbon-fiber texture sits under the reflective gloss layer, not a flat printed pattern.
• Premium-grade polymeric hybrid film with air-release channels: consistent, bubble-free installation.
• Henkel solvent-based acrylic adhesive: transparent, ultra-weather-resistant, safe on factory paint, clean removal.
• Stretch and conform without losing the weave: handles edges, recesses, and moderate curves for both interior and exterior applications.

In direct light, Premium Black throws a reflective glint across the weave, but with a warm bronze-gold cast running through the highlight instead of a plain white one, but real difference from a standard glossy black carbon finish. Application photos confirm this holds up outside a studio roll shot, on an installed panel, the weave reads as a fine, tight box-weave that shifts from anthracite-grey where light hits directly to a deeper near-black in less-lit areas, with that same warm streak running through the brightest point of the reflection.

Specifications

Reliable polymeric PVC for partial application. Designed for wrapping smooth surfaces or elements of medium difficulty in wrapping, such as spoilers, mirrors, etc.

• Film Thickness: 0.13 mm
• Backing Liner Thickness: 0.13 mm
• Release Liner Thickness: 0.03 mm
• Total Thickness (with liner): 0.29 mm
• Type of Film: Premium-grade polymeric hybrid film with air-release channels
• Colors: Black
• Series: 180 Series

Adhesive & Liner

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double-side PE coated Kraft. One side solventless silicone-coated, air release (0.03 mm) (ISO 9001, ISO 14001, OHSAS 18001)

Storage

• Storing Period: 2 years if stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place

Performance

• Durability / Warranty: Datasheet (Click the link)
• Application Temperature: +5°C to +30°C
• Usage Temperature: -30°C to +45°C
• Dimensional Stability: Shrinkage of less than 2%
• Plastification: 28%–38%
• Breaking Strength: 23.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05
• Peel Strength: 6.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04
• Light Ageing in UV Exposure: Test Method ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005
• Test Result: 3–4
• Exposure Cycle: ASTM D4329-13 Cycle A
• Lamp Type: UVA-340
• Exposure Conditions: 8h UV at (60±2.5)°C BPT, 0.89 W/(m²•nm) @340nm, 4h condensation at (50±2.5)°C BPT, Exposure Duration: 44h
• Post-heating: 95°C

Packaging

• Roll Width: 152 cm
• Length: 18 m
• Weight: 14 kg