Bond Gold is the darkest and most dramatic of TeckWrap's gold family. Rather than staying gold throughout, the base shifts hard with the angle. Parked in shadow or lit from above, it reads as a deep, almost black olive bronze, and only turns to warm champagne gold where direct light hits the panel head on.

This kind of flop, shifting from near black to gold depending on the light angle, is the same effect Porsche's factory Dark Olive Metallic is known for, though that color usually needs a six figure Turbo S to access it. Next to Golden Yellow's steadier brass and Hornet Yellow's warm amber, Bond Gold is the moodiest and most secretive of the three, reading like a sophisticated finish more than a bright one.

Key Attributes

• Dramatic flop effect: shifts from near black olive bronze in shadow to warm champagne gold in direct light.
• Darkest of the house's golds: moodier and more secretive than Golden Yellow or Hornet Yellow.
• Large, coarse metallic flake: creates the dramatic light shift rather than a flat, even sparkle.
• Weatherproof adhesion: Henkel solvent based acrylic adhesive, ultra weather resistant, removes without residue.
• Smooth installation: high grade calendered vinyl with air release channels lays down without bubbling.

OEM Match

• Same dramatic black to gold flop effect as Porsche's factory Dark Olive Metallic, usually only available as a costly factory option.
• Shares the shifting character of automotive chameleon and flop paint finishes generally, without the show car price tag.

It's the gold that looks like it's hiding something, which is probably the point of the name.

Specifications:

• Film Type: High-grade polymeric calendared vinyl with air-release channels Series: 190 Series
• Total Film Thickness: 0.32 mm
• Film Thickness: 121 μm
• Release Liner Thickness: 0.18 mm

Adhesive & Liner:

• Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1.9 printed, double-side PE-coated Kraft (ISO 9001, ISO 14001, OHSAS 18001)
• Storage: +10°C to +20°C, 50% relative humidity, in original packaging, away from direct sunlight; shelf life: 3 years
• Durability/Warranty: Click here for TeckWrap Datasheet

Performance & Material Properties:

• Release Force (N/25mm): Standard 0.04–0.12, Result: 0.1 (23℃, 54% RH)
• Initial Tack (g/25mm): Standard 800–1500, Result: 1254 (23℃, 54% RH)
• 180° Peel Strength (N/25mm): Standard ≥7.85, Result: 11.17 (23℃, 54% RH)
• Adhesion Strength: Standard ≥60, Result: 70 (No shifting)
• Post Heating: 100°C
• Aging: High-temperature 65℃ (7 days) and low-temperature -65℃ (10 days) without adhesive residue

Installation Guidelines:

• Application Temperature: +17°C to +18°C
• Service Temperature: -45°C to +45°C
• Tools Needed: Soft squeegee with buffer
• Conformability: Flat and moderate curves, deep recesses with inlays
• Directional: Yes
• Overlap Width: 4–5 mm

Packaging:

• Roll Width: 152 cm
• Roll Length: 18 m

Important Notes

• Screen images may not fully represent the color; always check the color swatch
• Use rolls from the same production LOT: for consistent color
• Scratches during application or daily use are not covered under warranty