TeckWrap Autumn Blaze is a soft, warm coral with a super-matte finish. It skips the brightness of a gloss orange and the flatness of a plain matte, landing on a friendly, slightly retro coral that stays easy on the eye in any light.

Key Attributes

• Warm coral tone: a soft orange-pink that reads warm and friendly, without looking loud or neon.
• Super-matte surface: a very low-sheen finish that keeps the color soft and free of glare in any light.
• Henkel adhesive: solvent acrylic adhesive that stays clear and holds up to sun and regular washing.
• Clean removal: comes off with heat and leaves the factory paint underneath unharmed.
• Wraps edges and curves: air-release channels and a stretchable film follow edges and moderate recesses for an even finish.

Autumn Blaze is a warm, soft color that shifts a little with the light. In full sun it looks brighter and more orange. In shade it calms down and reads softer, closer to a muted coral. The super-matte surface keeps it from ever looking glossy, which is what gives it that easygoing, retro feel. It looks right at home on a classic shape like a Mini, and adds a bit of warmth to a modern car too.

OEM Match

• Closest modern reference: Porsche Lava Orange, Autumn Blaze is softer, pinker and more muted, and matte instead of glossy.
• Far more coral and toned‑down than Jeep Tuscadero's hot pink.
• In the spirit of heritage corals like Ford Samoan Coral and Lancia Rosso Salmone.e GM Coral

Soft coral like this is rare on modern cars and has a fun, retro character. TeckWrap Autumn Blaze brings that warm, easygoing look to any vehicle, and it comes off cleanly when you want to change it.

Specifications

• Thickness of the film: 0.13 mm
• Thickness of film with release liner: 0.14 mm
• Total Film Thickness: 0.27 mm
• Type of film: Premium-grade polymeric hybrid film with air-release channels
• Series: 180 series

Adhesive & Liner:

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)
• Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place
• Durability/Warranty: Datasheet
• Dimensional Stability: Shrinkage less than 0.20%
• Plastification: 25%-32%
• Breaking Strength: 30.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05
• 180º Peel Strength (to steel panel): 9 N/10mm (Average) Test Method: ASTM D3330/D3330-04

Light Ageing in UV Exposure:

• Test Method ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005
• Test result: 4-5 / Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-340 8h UV at (60±2.5)℃ BPT, 0.89 W/(m²·nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 48h

Package:

• Roll width: 152 cm
• Length: 18 m
• Weight: 13 kg

Install tips:

• Temperature: from +18°С to 20°С, usage from -30°С to +30°С
• Tools: Standard squeegee with a soft buffer
• Conformability: smooth and medium curved surface
• Directional: yes
• Overlap width: 3-4mm

The protective cap should be peeled off before installation.:

Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.